Lighting Kits - www.sparkcycleworks.com

DIY Mods!

Update your ebike, moped, or vintage motorcycle with Spark’s Unique Mod products

Battery Options

Add a Second Battery to your eBike or Purchase one of Ours for your Own Project

Quick View
“Titan Elite” 72V 70ah Battery Price range: $2,495 through $2,595

Add to Wishlist
- Dimensions including handle and external screw heads: 16.5″ x 8.25″ x 6.25″
- Stainless Steel Rust Proof Enclosure
- Ant BMS with Bluetooth Connectivity
- 72V 70ah
- 200 Amp Continuous Rating
- 550 Amp Peak Rating
- QS8 Connector
- Samsung 50s Cells
- Not Compatible with Javelin 1.0
- 1-2 Week Manufacturing Time, Made in USA
Select options This product has multiple variants. The options may be chosen on the product page
Quick View
“Titan” 72V 40ah Battery Price range: $1,495 through $1,595

Add to Wishlist
- Dimensions including handle and external screw heads: 16.5″ x 8.25″ x 6.25″
- Stainless Steel Rust Proof Enclosure
- Ant BMS with Bluetooth Connectivity
- 72V 40ah
- 200 Amp Continuous Rating
- 550 Amp Peak Rating
- QS8 Connector
- Samsung 50s Cells
- Not Compatible with Javelin 1.0
- 1-2 Week Manufacturing Time, Made in USA
Select options This product has multiple variants. The options may be chosen on the product page
Quick View
Battery Blender™ Original price was: $150.Current price is: $125.

Add to Wishlist
- Add a second battery to your electric bike today!
- NOT COMPATIBLE WITH REGEN!
- Blend any 2 batteries using even different voltages and chemistries
- Compatible with 72V and Under
- XT60 Connector: 30 Amp Rating/ 35Amp Rating Experimental (must allow adequate air flow around device)
Sale!

Read more

Motorcycle Brake Kit

Add a Motorcycle Brake to your rear hub motor ebike

Quick View
Rear Motorcycle Brake Upgrade Kit $225

Add to Wishlist
Lead Time: currently about 1-1.5 week for production and processing

Basics:
- Designed to mount on standard hub motors
- Designed for frames with side mount brake calipers, not top mount
- Not for front brake
- May require modification by customer to fit bikes. We include a variety of hardware to adapt to as many bikes as possible, but are slowly developing our list of compatible bikes
- 100% money back guarantee for bikes that the kit does not fit on
Components:
- Brake hose
- Motorcycle brake lever with switch output and threaded slot for M10 mirror
- Stainless steel adapter plate with Stainless Steel M5 screws for high strength
- Powder coated Steel Caliper Mount
- Stainless steel hardware and washers
- DOT fluid ONLY!!
Select options

Lighting Kit!

Pick a headlight (or use your own) and use this kit to add Lights and a Horn to anything. YES, ANYTHING. Want to add turn signals to your office chair? Fine. Lawn mower? No problem. This kit has a variety of options to make it work on anything.

Quick View
Full Lighting Kit (no headlight) Original price was: $175.Current price is: $165.

Add to Wishlist
- Individually built to order. Requires 1-2 week production time
- Does NOT INCLUDE VOLTAGE CONVERTOR. Runs on 12V. If convertor is needed, please select from Mods Page
- Has HIGH Brake signal output for controllers, this is a 12V signal commonly used on Fardrivers
- Works with all Spark headlights
- Includes 4 turn signals
- Includes horn
- Includes Rear brake light
- Can add full lighting array to any vehicle, not just bikes!
- Uses standard Julet brake connectors
Sale!

Select options
Quick View
Full Lighting Kit with (Mono Headlight Bundle) Original price was: $295.Current price is: $245.

Add to Wishlist
- Individually built to order. Requires 1-2 week production time
- Works directly with out Fardriver kit
- Includes 4 turn signals
- Includes horn
- Includes Rear brake light
- Includes Mono headlight
- Runs on 12V
- Can add full lighting array to any vehicle
- Uses standard Julet brake connector
- Has HIGH BRAKE OUTPUT, for Fardriver and other controllers than can have brake activated by 12V
Sale!

Select options

Headlights

Prewired with our 4 Pin output for DRL, high beam, and low beam. Works on all our bikes and kits.

Quick View
DIY HEADLIGHT KIT $15

Add to Wishlist
- Want to use your own headlight? on our lighting harness?
- Use this quick no solder kit to make your own set up
- Use any 12V motorcycle headlight, strip the wires, insert into the corresponding lever nut, add the heat shrink, and light it up!
Add to cart
Quick View
Tracker Headlight $60

Add to Wishlist
- Works with our standard harness
- No soldering or custom wiring
- Halo, low beam, high beam
- 12V
Add to cart
Quick View
Hooligan Headlight $65

Add to Wishlist
- Works with our standard harness
- No soldering or custom wiring
- Halo, low beam, high beam
- 12V
Add to cart
Quick View
Droid Headlight $120

Add to Wishlist
- Works with our standard harness
- No soldering or custom wiring
- Halo, low beam, high beam
- 12V
Add to cart
Quick View
7″ Mono Original price was: $145.Current price is: $125.

Add to Wishlist
- Possible slight cosmetic changes depending on supply
- Works with our standard harness
- No soldering or custom wiring
- 12V
Sale!

Add to cart
Quick View
Animation 2.0 Headlight $145

Add to Wishlist
- 1-1.5 week lead time
- Works with our standard harness
- No soldering or custom wiring
- Halo, low beam, high beam
- 12V
Add to cart

12V Outputs

If your bike doesn’t have a reliable 12V, you can pick from our three options. Eyelets are great for Fardriver and Sabvotons, XT60 is used by tons of bikes, and Rechargeable is great for vintage bikes.

Quick View
36-72V to 12 V Output (Eyelet Version) $50

Add to Wishlist
- Add a 12V output to your 36V to 72V system
- Uses Eyelets for easy wiring to a Fardriver or other high powered controller
- Includes a 10A fuse
- 10 A output
Add to cart
Quick View
36-72V to 12 V Output (XT60 Version) $60

Add to Wishlist
- Add a 12V output to your 36V to 72V system
- Uses a XT60 parallel connector to easily splice into your Ebike. Simply unplug your battery from the controller and install this piece.
- Includes a 10A fuse
- 10 A output
Add to cart
Quick View
36-72V to 12 V Output (XT90 Version) $65

Add to Wishlist
- Add a 12V output to your 36V to 72V system
- Uses a XT90 parallel connector to easily splice into your Ebike. Simply unplug your battery from the controller and install this piece.
- Includes a 10A fuse
- 10 A output
Add to cart
Quick View
Rechargeable 12V Output $105

Add to Wishlist
- 1 Week lead time for our team to manufacture
- Don’t have a reliable 12V output on your bike? Use this rechargeable battery to power everything!
- Must use included horn due to to power limitations
- Includes 5 amp fuse to protect battery
- Lasts between 2-4 hours
- Can be charged off USB
Read more